Monday, September 25, 2017

Come See the Market Street Exhibition Layout

By the way, if you're a member of the National Model Railroad Association's Pacific Coast Region, note that we're having layout tours in the San Jose area this Saturday.

I'm showing the Market Street exhibition layout as part of the tour. The layout's still new and incomplete, but if you're interested in prototype operations or portable layouts, come by and see the choices I made and what you might do the same or differently.

NMRA PCR Members can find the list of layouts on the Yahoo e-mail list for the group.

Sometimes You've Just Got To Build

One of the common problems when I build things is that I might not always want to build what’s top on my priority list. Take the Vasona Branch layout, for example. I’ve got a list of projects to do there - scenes to decorate, structures to build, track to tune, freight cars to replace, engines to detail. I might call that finish work, kind of like finish carpentry. Houses, you see, need two kinds of carpentry - rough carpentry (to put the walls up, provide surfaces for plaster or sheetrock walls, and provide support for plumbing and electrical fixtures), and finish carpentry (to install trim, decoration, and built-in furniture.)

Yep, sometimes I just want to hammer together a bunch of two by fours, and that’s not the time for me to build fine cabinetry.

For model railroading, that rough carpentry probably could be interpreted as building something new and large - thinking through a new design, building new benchwork, laying new track. Perhaps a new section of layout. Perhaps a whole new layout. That’s what I’ve been doing lately.

The Market Street Exhibition Layout

I’ve had the idea of a modular layout kicking around for a while. It’s not like my garage layout is complete, or that I want to start from scratch, but my visit to Maker Faire got me thinking a lot more about some way of sharing my modeling and the hobby. I’ve instead wanted to build a modular layout for the shows, and perhaps build some stuff outside my usual modeling areas. The original idea was to build a quick modular layout for the San Jose Maker’s Faire in September - showing off Santa Clara valley history, and showing trains moving. My general idea is something like a British display layout - a small scene with staging to generate enough trains for interesting operation.

Specifically, I wanted to model a place I’ve already modeled in a small shelf layout - San Jose’s Market Street station, the original mainline station for the Southern Pacific in San Jose It’s a place lost far in the past; Southern Pacific abandoned this station in 1935, replacing it with the new Diridon station on the west side of town along the former South Pacific Coast narrow gauge right-of-way. The former West San Jose station, often known as the “narrow gauge” station for its South Pacific Coast railroad heritage, replaced the “broad gauge” mainline station. With the change, the area north of downtown changed from an active transportation hub and commuter terminal to a warehouse and industrial district; by the 1980’s, a good deal of the land was cleared for redevelopment, and it’s only been in the last ten years that new construction’s gone up around San Jose’s formerly busy main station.

And the Market Street station was quite busy. During its heyday, the Market Street station was a busy place for San Jose, the station had 72 arrivals and departures a day. (In comparison, Diridon handles around 90 trains a day today.) There were 60 commutes leaving, starting at 4:45 am and going until 11:00 pm. Six name trains - the Sunset Limited, Daylight, Padre, Lark, and Coaster - all stopped at San Jose. Some trains had cars switching to Oakland versions of the same train. There were multiple lesser trains heading to Santa Cruz, Monterey, or Salinas. And all these trains passed through a two-platform Victorian train shed, with approaches on both ends crossing multiple city streets - quite a chaotic scene during the morning commute.

The Market Street station area has a fair amount of operational interest. Because it only had two platforms, trains had to be put together and taken apart quickly to leave space for the next train. Small yards on each side of the station provided a place to stage passenger trains. Industries nearby - a cold storage warehouse, cannery, assorted warehouses, and a freight station - add freight business. Historically, the location also tells about a time when the downtown station was downtown, and where trains running down the middle of Fourth Street.

Now, I’ve built this station before. My current Market Street station scene sits on a 24” by 7 foot shelf layout in my office. I’d started it before I’d begun the Vasona Branch layout, and I’ve shared some of the models I built for that layout in the past. But it hasn’t been satisfying. It’s too small to do any operations and switching. Even if I could do minor switching, I can’t reproduce all the complexities of trying to get the entire morning commute fleet out. Although I was able to build some large buildings, the shelf is too cramped to build the massive buildings that surrounded the railroad tracks. And even though the current shelf layout isn’t quite enough, the models I’ve built for it means I already have some of the structures I’d need for the new layout.

The Track Plan

So how to start? My first aim was the track - decide on a realistic track arrangement, figure out the tracks needed for handling the passenger traffic, and finally add the sidings and freight tracks to set the location of industries and add some additional operating interest. I’d been sketching out plans for a Market Street scene for months - sometimes imagining

There’s a reasonable number of sources for the track layout around the old Market Street station. There are valuation maps from the 1930’s where the SP drew in every track, compressed air line, drain, and property boundary. There are the Sanborn fire insurance maps showing both track and buildings. (Sanborn maps are often declared as inaccurate, but they look pretty decent for the area around the station. I suspect they’re less accurate if tracks changed frequently, or if there was a huge number of tracks.) There are SPINS railroad maps listing spurs for the railroad employees from the 1960’s - long after the station was gone, but hinting at what was there before. And there are photos, including the George Lawrence aerial photos from 1906. Only the valuation maps really declare what was there in 1930, but the other maps hint at track and use.

Deciding on the purpose of each track is a bit harder. Which tracks were important for passenger service, and which for freight? The George Lawrence aerial photos hint at which tracks had boxcars and which had passenger cars. A 1931 track list for San Jose gave additonal hints; it showed four cars as “passenger spur”, likely to hold coaches waiting to be put on trains, on the north side of the tracks, and two tracks listed as passenger work tracks on the south side of the tracks. Photos of trains moving through the station showed baggage cars on the southern spurs, trains waiting under the train shed, and locomotives rolling every which way.

At this point, the track plan showed I’d need the three tracks for the station (two tracks under the train shed, and freight track bypassing the station). I’d need two small yards: the north yard for storing passenger cars, and south tracks for baggage and more holding tracks. On the west end, I’d need two tracks leaving the yard to the left to represent the tracks to and from San Francisco, and to and from the Lenzen St. engine terminal. On the east end, I’d want the tracks splitting to Oakland and Los Angeles, with the 4th Street Tower and Golden Gate Cannery between them.

This still left a fair amount of space. Just west of the station, the San Jose freight station sat with multiple tracks in front of it, and a freight yard behind it. These tracks would be useful for additional switching, so it was an obvious bit to add. Some more freight spurs would give me more places for freight traffic, so I added a packing house behind the station, Santa Clara Valley Cold Storage just to the east, the spur to the Golden Gate Cannery, and a track behind the freight station as a place to hide cars going to the yard. 
The above track plan shows my attempts to shoehorn all that into three separate sections.

Next time, a bit about construction.

Saturday, September 16, 2017

Podcast: Concrete Utopia

If you’re interested in minutiae about transportation and transportation policy - how a freeway or bridge ended up where it did, here's something worth a listen.

Matthew Roth, the historian for the Auto Club of Southern California, wrote his Ph.D. dissertation on the history of Los Angeles freeways. The common wisdom is that LA was car-crazy, but Roth argues that every major road project has faced major opposition and obstacles.

Back in 2009, he spoke at the Huntington Library about a few specific projects: the Ramona Boulevard highway leading from downtown Los Angeles to points east, the Aliso Street viaduct, and their effect on what became the San Bernadino and Hollywood freeways. Roth talks a bit about politics, funding, and how civil engineers get projects built.

The Huntington Library shared that lecture as a podcast; you can listen to it on the internet. If you’ve got a Mac, you can also subscribe to the Huntington’s California and the West podcasts, or download the lecture to your iPhone or iPad for easy listening.

If you want to learn more, you can read his PhD dissertation, Concrete Utopia: the development of roads and freeways in Los Angeles, 1910 - 1950.

There's a bunch of interesting audio recordings - podcasts and oral histories - out on the Internet these days, and they're an interesting change from radio or music.

  • I've been enjoying East Bay Yesterday which has done a great job of sharing stories about Oakland and Berkeley. The show covers topics as varied as Dorothea Lange and her photos, early baseball in Oakland, Richard Pryor's comedy, mudflat art, Bruce Lee, and the 1990's East Bay punk scene.
  • The Los Gatos Museum has shared oral histories with long-time residents of Los Gatos, letting us hear Jack Panghinetti, Richard More, and others tell us about the Hunts cannery, railroads, and accidentally igniting dry cleaning fluid.
  • The Bancroft Library at U.C. Berkeley often shares the raw tapes for their oral histories, letting us listen to Frank Nutting talk about the founding of Sun-Maid, or John Parr Cox talking about the Parr Terminal on the Richmond waterfront.


[Photo showing widened Ramona Blvd. highway at Mission Road, just east of the L.A. River, in 1935. Fun fact: Del Monte’s former Los Angeles cannery would have been behind you to the left between Aliso St. and Macy St., between Mission Road and the Los Angeles river. Photo from the USC Digital Library / California Historical Society, from the Title Insurance and Trust / C. C. Pierce Photography collection..

Monday, August 21, 2017

3d Printing in Model Railroading: The New Normal

Corey's D&RGW steel gondolas

A couple months ago, I shared my experiences selling 3d printed freight cars made in my garage. One of the first points in my talk was "you’re going to see lots more folks making kits this way in coming years."

And of course, we do see more folks making cars this way. Corey Bonsall recently told me about his drop-bottom-gondolas that he’s making on a Form 2 Printer. Corey’s model is the uncommon 42 and 46 foot GS gondola used by the Rio Grande and Utah Coal Route. It’s an uncommon prototype needed by D&RGW modelers. As I found with the Hart cars, gondolas are well-suited to 3d printing because of the complicated mechanisms and frames, need for inside-and-outside detail, smaller cross-section.

Corey is selling his models on eBay - $95 for a pair, which after my experiences seems like quite a decent price considering the labor involved.

Corey also detailed how he prints the models on the Formlabs discussion board. He made some different tradeoffs than I did. Corey 3d printed solid grab irons and steps rather than holes for wire grab irons. I'd gone with wire grab irons to match the resin models I've made; I love the detail, but I find drilling all the holes and placing the wires takes way too long. Corey's models shows quite acceptable detail, and also shows he added more detail than just a featureless bar. Corey also oriented the model for printing in a more clever way. He managed to tilt the model and add enough support structures to print the model in a single piece, with good detail inside and out. He widened the center channel for weight. Corey not only suggested usual lead weights, but pointed out that 3/16” tungsten cubes are pricey but available (about $6 / ounce as Pinewood Derby weights, but I assume there's cheaper sources. They're 1.7x the density of lead!)

These cars appear close to the SP’s G-50-9 series gondolas that Ulrich’s metal kits were based on. The Ulrich kits are still around, but like a lot of 1960’s models are getting scarcer. It would be neat to have another alternative for another of the SP’s iconic gondolas.

Meanwhile, I'm keeping my eyes peeled to see which other 3d printer owners decide to get into the model railroad manufacturing game.

Wednesday, May 17, 2017

Maker Faire in San Mateo: This Weekend!

If you're within driving distance of the San Francisco Bay Area, don't forget that the Bay Area Maker Faire is at the San Mateo Fairgrounds this weekend (May 19-21). Billed as the "world's largest show and tell", it's a huge, amazing World's Fair of crafty entertainment: multiple buildings full of folks showing off garage projects, manufacturers showing off the latest in electronics and tools, and tons of wacky and just plain interesting creations. I'd held off going for years because I wanted to spend the time on my own projects... but I finally went last year and found it quite amazing.

More importantly - for us as model railroaders - it's a gathering for our people. Much of Maker Faire is non-commercial; it has normal people showing off the things they've made with electronics (belly dancing outfit with an Arduino), machined metal, crazy Rube Goldberg devices (garage-sized spirograph that draws on the pavement with chalk), ham radio folks building high speed data networks, and parents helping kids understand biology by building cells out of Fimo clay.

And then there's all the crazy stuff that comes straight from Burning Man, like the Live Action Mousetrap game (with 5,000 lb safe crushing a car at the end), strangely lit art projects filling the darkened main hall, blacksmithing classes, oddly-shaped cars and conveyances, and sculptures shooting twenty foot high flames into the air.

More importantly, if you've had any questions whether the younger generation wants to make things, Maker Faire will convince you that the younger generation not only wants to build stuff with their hands, but is building some pretty amazing things. You'll see it both in the sheer number of kids watching and participating, and in the various clubs, and robot leagues, and craft projects that encouraging more kids to build things. Many booths are even interactive, allowing kids (and adults) to make something right there as a first step towards filling a garage with large metalworking tools.

Note that Maker Faire takes over most of the parking lots at the San Mateo fairgrounds, and the crowds are huge. Plan to either park at satellite lots and take shuttle buses to the fairgrounds, or take Caltrain to the show. Buy the tickets in advance, and bring comfortable shoes and a sense of wonder.

Details, details...

Now, if all that description didn't convince you to go, how about a quick run-down of what I saw last year, and what Maker Faire says about how we ought to be promoting our hobby?

Make Things, Share Things

Like I said, these are our people - many of the folks demonstrating at Maker Faire (or attending Maker Faire) have the same love of building things with their hands that we as model railroaders do. One maker space (shared shop and club) in Sacramento, for example, loved the idea of forming a team and working through a challenge. They built a spaceship bridge with multiple computer displays, and they'd have evening "operating sessions" where four people would work through some challenge set up by another - one person on navigation, another on engineering, weapons, life support, and someone sitting in Captain Kirk's chair. As a fan of model railroad operations, I can understand exactly what buzz they got out of a team co-operatively pulling through a problem.

Other booths were full of all the vendors selling Arduino, Raspberry Pis, and all sorts of other electronics that can run model railroad signals, or create a "working" car scale. I brought home a little Wi-Fi enabled microprocessor for a yet-to-be determined project on the layout. Other folks sold little boards that could be used to build a handheld device that could communicate with a cell phone over Bluetooth - just the right innards to make my own wireless throttle. Others showed off snap-together electronics kits to help kids get interested in electricity, or robots, or programming.

The folks selling all the modern shop tools were also there, with multiple 3d printer companies, laser cutters, huge CNC cutters that could carve full sheets of plywood at a time (now that would speed up benchwork!) For me, I found it great to compare the different printers and talk with the manufacturers. For folks less familiar with the different kinds of 3d printers and laser cutters, Maker Faire was the perfect way to see these machines in action, understand how they really worked, and what the resulting parts looked like.

There were also the crazy inventors that reminded me of a lot of my model railroader friends - folks making home-brew electronics for monitoring your car's diagnostics port, or some guys who had made their own pick-and-place machine for doing garage manufacturing of electronics.

We've all been enjoying many of the perks from the same electronics crowd in model railroading. In our local group, I know folks who are doing small-scale electronics manufacturing, or building CTC panels run off some of these bits of electronics. We're all quite happy about our garage manufacturers using those laser cutters to make finely detailed brick or designing kits for Southern Pacific stations. The crowd at Maker Faire are the same sorts of folks.

One Interest, but a Bunch of Directions to Explore

There's also the kindred spirits from near and far. This year, like last year, the Bay Area Garden Railway Society will be showing off large-scale live-steam locomotives. The historians and collectors were also represented, with the Computer History Museum bringing many 1970's era personal computers for anyone to come and try programming. For all of you who got a start programming on BASIC on a TRS-80 or Apple II back in 1977, getting to type "10 PRINT "HELLO"; 20 GOTO 10" can bring back some awfully fond memories. The Computer History Museum's larger projects have a lot more in common with railroad museums; Computer History Museum's restoration and operation of a 1950's IBM punch card-based computer probably has many of the same restoration stories as the folks getting an SD-9 running again... only with slightly lower amperages, and less grease.

Several ham radio clubs also showed up last year. I'm a little ashamed to say my mental image of ham radio operators is a bunch of guys tapping out morse code and trying to contact folks halfway around the world.

Their huge booth did match the stereotype a bit; they were offering ham radio license prep *and* license exams in the booth. But they also described themselves as "Not Your Grandfather's Ham Radio". The members pointed out that ham radio was a hobby for folks that liked building, experimenting with, and sharing technical projects that involved radio. These days, a ham radio operator is much more likely to be experimenting with high-speed Internet over radio than crowing about contacting a fellow operator in Russia.

I like that message. "We want to make things. Our hobby gives us a structure to figure out what to build next, past projects to build on and expand, and a community that will encourage and inspire us." Model railroading's a lot like that. We all have some interest in railroads, of course, but we all have our own reasons for being in the hobby: constructing models, experimenting with electronics, learning about geology, historical and architectural research, photography, or motors and mechanical engineering. We've got long-lived projects like our home layout or our particular subject interest that keeps us going. We've got a bunch of like-minded friends who understand our fascination with a particular locomotive, or freight car, or long-gone industry.

Like I said, Maker Faire is our people.

Be Interactive.

Maker Faire booths are often interactive; the goal isn't to get you watching someone doing something, but for you to do it as well. A friend from Apple, for instance, made a human-sized spirograph from bike parts, conduit, 3d printed parts, a scooter, and chalk. He sets it up outside one of the halls, and lets the kids ride around on the scooter while drawing patterns on the concrete. Like the Exploratorium, the infamously hands-on museum in San Francisco, Maker Faire is all about letting people touch, try, and make.

A booth last year was a bit more involved; they wanted to teach kids about the parts of a human cell, so they brought some Fimo clay and showed kids how to make little models of the cell by forming all the different bits in a multi-colored log. Slice the log apart, and the kid has a bunch of little clay cells. For a $5 donation, they'd go through the project with your child and send her home with a little reminder that biology was fun.

The fiber arts community went all-in, with a huge booth area and many volunteers teaching anyone interested how to crochet or knit. They even brought lots of spare knitting needles, crochet hooks, and yarn so folks could be sent home with a just-started project and the tools to complete it.

With model railroading, we're often not good at that kind of interaction and teaching. We can have a train show, but kids don't often get a chance to touch the models, let alone try building something themselves. Years ago, I remember a Canadian model railway show where one club had several modelers constructing models right there on the show floor, answering questions about the hobby, materials, and techniques the whole time. I loved it - both the chance to see how someone else models, and the chance to share tips while motioning with the specific model and tools. The modeling classes at model railroad conventions show how this interaction can draw people into the hobby more. I'd love it if we could find ways to introduce kids to model railroading - perhaps making a first freight car, or switching freight cars on a Timesaver (the PCR division's timesaver got me interested in switching as a teenager), or getting to make a quick cardboard building or hillside.

The breadth of Maker Faire is also stunning. I'd go from 3d printing or weaving projects from college art students, to a glowing robotic giraffe from Burning Man to scientists from Oak Ridge National Labs answering any and all science questions while making a supercomputer out of cheap Raspberry Pi computers. There was an entire section on living off the grid, gardening, and structures - I didn't even make dent that section last year.

And again, everyone was working to make their exhibits interactive. The Crucible, a shared shop for blacksmithing and metal arts, was doing their usual "shoot flames twenty feet in the air" schtick, but was also demonstrating blacksmithing, and letting kids paint and fire clay pots.

Next door, the civil engineering students from San Jose State were showing off their prototype for a monorail-like city transportation system. At a quarter scale, it must have taken several trucks to bring the vehicles, track, and supports, but they had it running automatically under computer control. Better yet, the students could talk about what they'd learned as they fabricated the rails and support, coded the computer controls to keep cars from crashing into each other, and worked through the economics. The students were obviously having a blast describing their work, even as the Crucible was setting off blasts of propane and flames forty feet away - with noticeable heat.

About Model Railroading

Honestly, I think model railroaders ought to be better-represented at events like this Maker Faire. The folks attending are our folks: interested in building stuff, in experimenting, in learning skills, and in sharing what they've learned with others. Maker Faire also shows the breadth of all the tinkerers and builders in society, from experimenting with lasers or modern computers to those who want to play around with tintype photography or blacksmithing, or the jury-rigged magic of the giant spirograph and live-action Mousetrap game. The focus on interaction - on letting kids and adults touch, and ask questions, and get a chance to see what the hobby is all about - seems essential to introducing new people to the hobby. Not everyone at Maker Faire might be interested in railroads. Those twenty-something kids who make the spaceship console, as much as they might be great candidates for yard master on a few model railroads I can think of, might never have caught the railroad bug. But if I brought out an operating layout of a yard and gave them a throttle, I suspect they'd appreciate the hobby and the games we play with model railroad operation.

How should our hobby interact with something like the Maker Faire? I don't think we need the NMRA at a table handing out brochures; we need to be interactive. We need to bring models, the people building models, and people operating trains. A couple friends and I talked a bit about an exhibit for the smaller Maker Faire run in San Jose every September. We thought about setting up a booth that could show the variety of directions in model railroading. We could bring some modules to show trains in operation, and talk about the historic research for Dave's model of the Santa Fe ferry slip in San Francisco. We could bring electronics, and talk about how John or Chuck built their CTC panels, and how the railroads kept trains from crashing into each other. We could build models with paper or styrene, give kids a paper building to cut out, put on the layout, and later take home. We could set up a timesaver to explain switching problems, and a loop of track so kids could handle a model train and get a sense for the fun of trains.

We never got around to that plan, but I think the idea is sound: share our hobby, share the fun of building things, and remind kids that they can make things too.


Again, the San Mateo Maker's Faire is May 19-21, 2017 at the San Mateo County Fairgrounds, just south of San Francisco. The San Mateo Maker's Faire is one of the largest in the country, if not the world - think of it as the equivalent of the huge Springfield, Massachusetts model railroad meet for the Maker community. If you're not local, keep an eye out for similar events in your area. Although there are similarly huge events in New York and elsewhere, there's also a ton of local, smaller Maker Faires that still capture the informal, show-and-tell feel. San Jose's Faire, for example, may not require multiple days to explore, but there's more time to talk with the participants, and wander, and just enjoy the kids and adults getting excited about laser cutters, balloon rockets, pressing flowers, or making music on home-made instruments. If you're part of a railroad, science, or historical museum, consider hosting a Maker Faire to get all these sorts of weird folks together to show what they're making.

Tuesday, May 16, 2017

Bakersfield and 3d Printing

I gave a talk on mass-producing freight cars with a 3d printer at the NMRA's Pacific Coast Region 2017 Convention; I've put the slides for that talk on-line, along with some hints about using SketchUp for making 3d models.

It was a fun talk to give - sharing the high points and low points of starting a 3d printing business out of a bedroom. If you read my article last year, you already heard my stories and opinions. 3d printing is closer to manufacturing than crafting, so trying to run off twenty - or even ten models - requires problem solving for the issues you might have expected getting a new production line running. I also mentioned last year how the labor required with tending the 3d printer was more than I'd expected. Finally, I'd been surprised by just how many one-off tasks needed to be done to get a new kit out the door, and how much time that took. Making a new pilot model took the same effort as building a good resin kit, and the time required was hard to justify when only selling forty or fifty kits. I've had a great time getting the Hart gondolas on the market, and I'd do it again for the right model... but it's not a path to riches.

In both the talk and the original article, I'd mentioned setting the price for my Hart gondola kits around $35 to make them comparable to a resin kit, and because I wanted a string of cars to be affordable. I realized after the talk that I also felt a bit of unexpected pressure from Shapeways. Shapeways would have charged $70 to make the Hart gondolas in Frosted Ultra Detail. That price set sort of an upper limit on the kits; if I found printing the kits on the Form One took too much labor for the price, I could raise them a bit... but as the price approached the Shapeways price, I had a pretty strong motivation to throw in the towel and just sell the cars on Shapeways with a small markup. Making the cars on my own printer... and in my own boxes... required beating the labor costs, yield, and quality that Shapeways could do.

The Bakersfield convention had many other great talks. Jack Burgess shared his own 3d printing experiences. He's been using Shapeways to make small parts for a few years now; one memorable project were Adirondack chairs for his Bagby Hotel. These tiny details might seem minor, but they do add an amazing amount of realism to a scene. Jack also remarked how 3d printing was addicting, and how he'd search around for another model to create. I've had the same feeling many times. Because 3d printing lets us make models we wouldn't have been able to make in any other way, it can be quite exciting to push ourselves for the next impossible model.

Monday, May 8, 2017

Coupon-Cutting Thursday II: Sweet Deals on a Track-Pull Tractor

One advantage of living in the early 20th century is you didn't need to go far to test-drive a tractor. Forget all those Internet-based car sales places that will bring a beige sedan for you to test drive at home; back in the 'teens, you could go down the block and test out a tractor at a local ranch.

November 3, 1916 San Jose Mercury Herald

Here, for example, is an ad from a November, 1916 issue of the Mercury Herald, highlighting upcoming demonstrations of the Bean Track-Pull Tractor:
  • November 3 at W. P. Lyon's orchard in Edenvale
  • the next day at Mrs. Post's ranch on McLaughlin Ave.,
  • the Flickinger orchard on Berryessa Road on the 6th,
  • November 7 at the Dutard ranch in Campbell ("Junction Santa Clara-Los Gatos Road with Payne Ave.", better known today as "that strip mall with the Togo's"),
  • F. E. Goodrich's ranch in Cupertino on the 9th,
  • the Thompson Ranch on El Camino near Santa Clara on the 10th, and
  • A. W. Ehrhorn's ranch in Mountain View, "just beyond the school buildings own November 10.

And place your order early, for there's only a limited number available for Santa Clara County. The Track-Pull was going for a thrifty $930, or $20 more for an installment plan - $50 down, $455 on delivery, and the remainder paid within a year. That's a sweet price for a tiny tractor, and with luck, you'd even be able to drive it around William Lyons' ranch to convince yourself it's just the right thing for the modern fruit ranch.

The Mercury Herald even did a three-column piece on the Track-Pull on November 1, 1916, interviewing the company general manager, J.D. Crummey ("he is enthusiastic over the possibilities of the tractor field and the new machine which his firm is now making... no machine has yet been put on the market that fills the requirements of the orchard and vineyard conditions in the west.") "It is the first tractor that drives as a horse pulls, and hence is able to do what is impossible with other tractors." Crummey also pointed out that the demonstrations were only the beginning, and would be repeated at fruit grower conventions in Napa, Davis, and Fresno in upcoming months.

Bean Spray Pump claimed to have sold $400,000 in tractors that first year, and $700,000 the next - meaning that at least a thousand of the Track-Pulls should have been clattering around orchards and small farms across the nation.

Machinists Needed. December 23, 1916 San Jose Mercury Herald.

And if your yard isn't big enough for a Track-Pull -- and ours certainly isn't -- there's some other ads to check out as well. Two days before Christmas, 1916, you would have found the Bean Spray Pump Company advertising for machinists to come build the beasts:

On account of the demand for Bean Track PULL Tractors, we find it necessary to increase our factory force, and also to run most of our machines nights. We therefore invite application for positions from the following trades: Expert Machinists, Tool Makers, Good Lathe Hands, Milling Machine Hands, and Experienced Drill Press Hands.

And there still wasn't enough labor for all the tractors that needed to be built. An ad in the December 20, 1916 San Jose Mercury Herald declared "Our entire output for all of January and up to February 10 is already taken", so a fair number of orchardists were going to be disappointed when they didn't find Track-Pulls under the tree at Christmas. Crummey noted in the San Jose Mercury article that a second plant in Lansing, Michigan would start producing the tractor in May, 1917. Even if Crummey was exporting jobs out of California, he noted "the Lansing factory is entirely owned by Santa Clara County stockholders, so that all profits from there return to this community."

Now, this may all seem quaint - tractor demos, comparisons to horses, and questions of exporting Santa Clara county jobs to the quite-dubious midwest. But other tidbits remind us how much things aren't that different from today. An Ebay seller was recently selling the program from the June, 1917 Bean Spray Pump Company's employee dinner.

Now, the menu has its own little surprises - the dinner started out with fruit cocktail, for example, which seems like the most San Jose way to start an employee dinner I can think of.

But the list of speeches looked awfully familiar for an all-hands meeting at any high-tech company. They led off with an outside speaker. The evening led off with Ernest Richmond, formerly of the J.K. Armsby Company, and just recently the founder of his own dried-fruit company which he would soon merge to form Richmond-Chase. As an outsider, his speech title - "Loyalty" suggests something motherhood-and-apple-pie as a soft opening. There needed to be something about the key company strength of manufacturing; H. C. Lisle spoke about "Our Factory in Lansing, Michigan". H. C. Lassen spoke for the sales force. The remote offices - Los Angeles and Fresno - had their boosters reminding the head office folks that there was more to the company than San Jose. H. L. Austin and J. H. Delaney talked about future plans, improvements, and new investments. J. D. Crummey's talk on "What We Are and What We Stand For" was a classic leadership talk.

And right in the middle of it was the talk on the crazy new product that might change the company. J. H. McCollough, one of the Track-Pull tractor startup guys, spoke on "Our Tractor". He surely sold everyone in the room on how the Track-Pull would pull Bean Spray into a new and profitable business. I'm sure he had PowerPoint slides of happy Track-Pull owners rolling around their orchards, and I'm sure he had some graphs of sales showing the hockey stick growth curves so familiar to Silicon Valley types. He probably even raised the point that the tiny Track-Pulls would change the economics of small farms and bring prosperity to every corner of the nation, and put up a photo of a smiling child in an orchard.

And we know how that talk went because anyone who's been in Silicon Valley for any length of time has heard that talk and that dream. Sometimes, it even came true. The Track-Pull tractor may not have been a home run or game changer for the Bean Spray Pump Company, but it's a nice reminder that this crazy place isn't that different from the Santa Clara of 1917.